PAIR/DELETE A DEVICE
Did you know pairing your smartphone with your
vehicle is quick and easy?
Pairing your smartphone with your vehicle will
open even more possibilities for your driving
convenience, such as playing music from your
phone or answering calls through your Uconnect
system.
1. Make sure Bluetooth® is enabled on your
mobile phone.
2. With the vehicle in the ACC or ON/RUN posi-
tion, press the Phone button on the vehicle’s
touchscreen menu bar.
3. Press “Device Manager”.
4. Select “Add Device”.
5. Follow the prompts on your phone and on the
touchscreen.
Follow these steps to remove your smartphone:
1. Press the Device Manager button on the
touchscreen.
2. Press the Settings gear icon next to the phone
or device you wish to remove.
3. Press “Delete Device”. The device should be
removed.
Use this QR code to access your
digital experience.
APPLE CARPLAY®
To use Apple CarPlay®, follow these steps:
1. Ensure that your iPhone® is unlocked for the
very first connection, then ensure Siri is
enabled in settings.
2. Connect your iPhone® to one of the media
USB ports in your vehicle, or pair your iPhone®
with the system. You have no need to plug
your device in if it is paired with the system.
3. Once the device is connected and recognized,
the Phone icon on the menu bar changes to
the Apple CarPlay® icon.
NOTE:
To use Apple CarPlay®, make sure that cellular
data is turned on, and that you are in an area
with cellular coverage. Your data and cellular
coverage is shown on the left side of the touch-
screen within Apple CarPlay®. Data plan rates
may apply.
Use this QR code to access your
digital experience.
Uconnect 5 NAV Display Pairing A Phone
Scan me
Scan me
12 INTERIOR
To Next Page
Loading...
