EasyManua.ls Logo

RAM Promaster 2016 - Electronic Speed Control

RAM Promaster 2016
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ELECTRONIC SPEED CONTROL
When engaged, the Electronic Speed Control takes over accelerator operations at
speeds greater than 25 mph (40 km/h) up to the maximum speed of 100 mph
(160 km/h).
The Electronic Speed Control Lever is located on the left side of the steering column.
NOTE:
In order to ensure proper operation, the Electronic Speed Control System has been
designed to shut down if multiple Speed Control functions are operated at the same time.
If this occurs, the Electronic Speed Control System can be reactivated by rotating the
Electronic Speed Control ON/OFF center ring and resetting the desired vehicle set speed.
To Activate
Rotate the center ring upward on the electronic speed control lever to turn the system
ON. The Cruise Indicator Light in the instrument cluster will illuminate. To turn the
system OFF, rotate the center ring upward a second time. The Cruise Indicator Light
will turn off. The system should be turned off when not in use.
WARNING!
Leaving the Electronic Speed Control system on when not in use is dangerous. You
could accidentally set the system or cause it to go faster than you want. You could
lose control and have an accident. Always leave the system OFF when you are not
using it.
Electronic Speed Control Lever
1 Set/Accel
2 On/Off
3 Resume
4 Decel
OPERATING YOUR VEHICLE
32

Table of Contents

Related product manuals