RAM PROMASTER 2018 - JUMP STARTING PROCEDURES

CAUTION!
Do not attempt to raise the vehicle by
jacking on locations other than those indi-
cated in the Jacking Instructions for this
vehicle.
1. Loosen (but do not remove) the wheel lug
bolts by turning them to the left one turn
while the wheel is still on the ground.
2. There are two jack engagement locations
on each side of the vehicle body.
CAUTION!
Do not attempt to raise the vehicle by
jacking on locations other than those indi-
cated.
NOTE:
The rear jacking location is located in
front of the rear tire and in front of the leaf
spring mount.
NOTE:
The front jacking location is located be-
hind the front tire and in front of the
driver/passenger door.
Assembled Jack
Jacking Engagement Locations
Rear Jacking Location
107