IN CASE OF EMERGENCY 193
SPARE TIRE REMOVAL
1. Remove the spare tire before attempting to
jack up the vehicle. Attach the lug bolt
adapter to the winch extension and insert
it into the winch mechanism.
Jack Tools
Winch Location
The winch mechanism is located under the
rear of the vehicle to the right of the spare tire.
Winch Extension
2. Rotate the wheel wrench handle counter-
clockwise until the spare tire is on the
ground with enough cable slack to allow you
to pull it out from under the vehicle.
NOTE:
The winch mechanism is designed for use with
the winch extension tube only. Use of an air
wrench or other power tools is not recom-
mended and can damage the winch.
Lowering Spare Tire
3. Pull the spare tire out from under the
vehicle to gain access to the spare tire
retainer.
1 — Wrench Handle
2 — Lug Bolt Adapter
3 — Winch Extension
7
21_VF_OM_EN_USC_t.book Page 193
To Next Page
Loading...
