RAMROD TASKMASTER 1350 PRO Series - Fluid, Lubricant, and Capacity Guide

IV - MAINTENANCE
19
FUELS, LUBRICANTS AND CAPACITIES
The service obtained from your Mini-Skid is greatly affected by the quality of the
petroleum products used in it. It requires only common products, which are
commercially available through the outlets of major refineries. The following
chart shows which lubricant to use in the various components of the Mini-Skid.
COMPONENT
TEMPERATURES
TYPE OF
LUBRICANT/FLUID
CAPACITY
Liter (US. Gals.)
Engine Oil
See engine owner’s
manual
See engine owners
Manual
See engine owner’s
manual
Fuel Tank
All Temperatures
Gas – Regular
Diesel – Regular
30 Liter (8 US gal.)
Hydraulic Oil
Reservoir
Above 0 degrees c
(32 F)
Below 0 degrees c
(32 F)
ISO 46 hydraulic oil
37 Liters
10 US Gal.
NOTE: For high temperature operation* S.A.E. 15W40 or 20W50 can be used.
*Above 80 degrees Fahrenheit or 27 degrees Celsius .
Fuel filler location: To the left of the
operator controls, Figure 24.
Figure 24
Hydraulic oil filler location: To the
right of the operator controls, Figure
25.
Figure 25
WARNING
Do Not Service Mini-Skid While
Engine is Running
WARNING
Never Add Fuel to a Mini-Skid When
the Engine is Running or is Hot.