Ramsey Electronics 2000 User Manual

Ramsey Winch Company
OWNERS MANUAI
Front iViount Electric Winch
Model 2000 with Hawse Type Falrleads*
Model 2001 with Roller Type Fairleads*
Model 7901 with Roller Type Fairlead*
V / ) Zi
I
'"Mk ^/UUiM ^ J -
(y '
Now Equipped with RAM-LOK clutch
MODEL 2000 with Hawse Type Falrleads
MODEL 2001 with Roller Type Fairlead
Congratulations
You have purchased the finest winch avail
able in its service class. It was designed
and manufactured to provide you with the
utmost in fun and utility. The new RAM-LOK
clutch gives you easier free spooling and
positive clutch engagement for greater
convenience. As with any device that com
bines power and movement in its use, there
are dangers if improperly used. At the same
time, there are easier and faster ways for
getting the job done if certain precautions
are taken first. Please read this manual
carefully. It contains useful ideas in obtain
ing the most efficient operation from your
Ramsey Winch and safety procedures you
need to know before beginning use. When
you follow our guidel ines for operation,
your Ramsey Winch will give you many
years of satisfying service. Thank you for
choosing Ramsey. You will be glad you
have one pull ing for you.
Limited Warranty
Ramsey Winches are designed and built to ex
acting specifications. Great care and skill go
into every winch we make. Warranty procedure
is outlined on the back of your self-addressed
postage-paid warranty card. Please read and fill
out the enclosed warranty card and send it to
Ramsey Winch Company. If you have any prob
lems with your winch, please follow instructions
for prompt service on all warranty claims.
Contents
Techniques of operation 2
Operating instructions 3
Tips for safe operation 3
Brief list for uses 4
Suggestions for maintenance of your winch 5
Troubleshooting guide 5
Winch parts drawing 6
Winch parts list 7
Solenoid switch parts drawing 8
'MODEL 2000/2001 12 Volt MODEL 7901 12 Volt
MODEL 2002/2003 24 Volt 24 Volt Available

Ramsey Electronics 2000 Specifications

General

Brand	Ramsey Electronics
Model	2000
Category	Winches
Language	English

Summary

Limited Warranty

Techniques of Operation

Operating Instructions

Spooling Cable

Operate thumbswitch to spool winch cable on and off drum.

RAM-LOK Clutch Operation

Engaging and disengaging the RAM-LOK clutch.

Initial Winching Operations

Perform break-in winching operations under light loads.

Load Alignment & Layering

Align load directly in front of winch for even cable layering.

Battery Setup for Heavy Pulls

Install heavy-duty batteries in parallel for heavy pulls.

No Personnel Lifting

Winches are not designed for lifting or moving persons.

Tips for Safe Operation

Safe Distance from Cable

Maintain safe distance from the cable when pulling.

Avoid Cable Tension Zones

Do not step over or near a cable in tension.

Protect Hands During Operation

Use gloves or rags to protect hands from burrs.

Minimum Cable Wraps for Load

Minimum five cable wraps around drum barrel for rated load.

Brief List of Uses

Suggestions for Maintenance

Troubleshooting Guide

Winch Parts List

Solenoid Assembly Parts

Switch Assembly Parts

Mounting Kit Installation Instructions

Installation Instructions

Remove Vehicle Bumper

Steps for removing the vehicle bumper.

Mount Kit to Winch Assembly

Instructions for assembling the mounting kit to the winch.

Bumper Installation

Instructions for installing the bumper with the kit.

Battery & Switch Connection

Connecting battery cables and remote switch.

Winch Cable Installation

Instructions for unwinding and securing the winch cable.

Mounting Kit Parts List