14
RAMTECHGLOBAL.COM
WES3 Maintenance Interface
The WES3 Maintenance Interface unit will detect any maintenance issues from any unit in the WES3 network and raise an alert
as soon as the fault/issue is detected. The alert activates the output of the unit, and can trigger connected devices such as an
autodialler, monitoring system or Building Management System (BMS).
These alerts include:
O Internal tamper
O Detector tamper
O Back tamper
O No radio
O Low radio
O Low battery
O Flat battery
O Water detection
Note: The WES3 Maintenance Interface is not a fire alarm device.
To Next Page
Loading...
