What to do if Ramtech Control Unit Group Flash 5 shows Re-arm or Unit latched?
If your Ramtech Control Unit displays 'Group Flash 5 - Re-arm or Unit latched', you should re-arm the unit according to the operational guidelines.
What to do if Ramtech Control Unit Group Flash 4 shows Tamper?
If your Ramtech Control Unit displays 'Group Flash 4 - Tamper', inspect the unit for any signs of tampering and ensure it is properly secured.
What to do if Ramtech Control Unit Group Flash 3 shows Unpaired?
If your Ramtech Control Unit displays 'Group Flash 3 - Unpaired', you should re-pair the unit following the pairing instructions.
General| Product Type | Wireless Fire Alarm System |
|---|---|
| Operating Frequency | 868 MHz |
| Operating Temperature | -10°C to +55°C |
| Relative Humidity | Up to 95% non-condensing |
| Battery Life | Up to 3 years |
| Power Supply | 3.6V Lithium battery |
| Enclosure Rating | IP65 |
| Communication | Wireless |
| Ingress Protection | IP65 (depending on device) |
To Next Page
