EasyManuals Logo

Rancilio Classe 10 USB Technical Manual

Rancilio Classe 10 USB
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
39
5.2.2.3 Total counters
Displays the total number of counters available for
each coffee group, for the water group and for the
iSteam group, plus the total summary thereof.
5.2.3 Graphics
5.2.3.1 Logo monitoring
Provides for setting of the following features:
- Logos ON/OFF selection
- Logo display sequence
- Logo display time (for the “Loop” logo, this
setting amounts to the display time of one single
screen page)
5.2.3.2 Quick show
Enabling this function enables continuous viewing of
the display logos.
It is possible to interrupt display of logos in the event
of:
- Coffee dispensing
- Hot water/4-TEA dispensing
- iSteam dispensing
5.2.4 iSteam
5.2.4.1 iSteam presence
Provides for setting of iSteam presence in the ma-
chine.
5.2.4.2 Milk frothing
Settingofthemilk’snaltemperatureandemulsion
grade, on a scale from “0” to “MAX”.
If set at level “0”, the milk is only heated. Increasing
the emulsion level will increase the milk frothing gra
-
de. The default setting here is the “MAX” level.
5.2.4.2 No milk frothing
Settingofthemilk’snaltemperatureandemulsion
grade, on a scale from “0” to “MAX”.
If set at level “0”, the milk is only heated. Increasing
the emulsion level will increase the milk frothing gra
-
de. The default setting here is the “0” level.
5.2.5 Wash cycles
5.2.5.1 Coffee wash cycle
Setting of the automatic daily washing cycle.
Here it is also possible to set the coffee dispensing
block function, if the coffee group wash cycle is not
performed within one hour from the appearance, on
display, of the relative wash cycle message.
5.2.5.2 Wash cycle counter
Displays the number of coffee wash cycles that have
been performed.
5.2.6 Data interfaces
Setting of the Rancilio IDS (Interface Data System)
for data interfacing.
It is possible to set either the DEBIT operating func
-
tion (data discharge only) or the CREDIT operating
function (with dispensing enabled via the cashbox
system).
In the event that this function is enabled without the
interface, the machine will go into block mode.
LOGO SETTING
QUICK SHOW
GRAPHICS
ISTEAM MODULE
FOAMED MILK
ISTEAM
STEAMED MILK
COFFEE CLEANING CYCLE'
CLEANING COUNTER
CLEANING
CONNECTION IDS
DATA
INTERFACES

Other manuals for Rancilio Classe 10 USB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rancilio Classe 10 USB and is the answer not in the manual?

Rancilio Classe 10 USB Specifications

General IconGeneral
BrandRancilio
ModelClasse 10 USB
CategoryCoffee Maker
LanguageEnglish

Related product manuals