R&S ESR7 - 4.3 I;Q Analyzer Mode; 4.4 Real Time Mode; 4.5 Measurement Mode Root Menus (HOME Key)

Measurement Modes
R&S
®
ESR
141User Manual 1175.7068.02 ─ 12
SCPI command:
INST SAN
4.3 I/Q Analyzer Mode
The I/Q Analyzer mode provides measurement and display functions for digital I/Q sig-
nals.
For more information on functionality available for the I/Q Analyzer see Chapter 7, "I/Q
Analyzer", on page 458.
SCPI command:
TRACe<n>:IQ[:STATe] on page 898
4.4 Real Time Mode
In Real Time mode, the R&S ESR performs measurements in the frequency spectrum
of a test signal without losing any signal data. You can evaluate the measurement
results in several result displays that are designed for the realtime analysis and com-
plement one another.
Real Time analysis is available with firmware application R&S ESR-K55 and hardware
option R&S ESR-B50.
For more information on functionality available for the Real Time mode see the sepa-
rate User Manual available for download on the internet (http://www2.rohde-
schwarz.com/product/ESR.html).
SCPI command:
INST RTIM
4.5 Measurement Mode Root Menus (HOME Key)
The HOME key provides a quick access to the root menu of the current measurement
mode.
Measurement Mode Root Menus (HOME Key)