R&S ESR7 - Softkeys for CISPR APD Measurements

Spectrum Measurements
R&S
®
ESR
311User Manual 1175.7068.02 ─ 12
The second picture shows the corresponding CISPR APD function.
The probability of time at 10e-2 corresponds to the duty cycle of 1 %. The maximum
level of -20.145 dBm corresponds to the peak level that has been measured in spec-
trum mode.
Softkeys for CISPR APD Measurements
Functions to configure CISPR APD measurements described elsewhere:
●
"Percent Marker" on page 322
●
"Res BW Manual" on page 184
●
"Scaling" on page 317
●
"Adjust Settings" on page 320
Acquisition Time.......................................................................................................... 311
Acquisition Time
Defines the measurement time for CISPR APD measurements.
Remote command:
[SENSe:]SWEep:TIME on page 639
Measurements