R&S MR4100G - Selecting the Active Channel for Fix Operation

Operating Manual 6175.4760.02 – 01 4.25
M3SR Series 4100 Selecting the Active Channel for ‘Fix’ Operation
4.3.5.10 Selecting the Active Channel for ‘Fix’ Operation
Softkey Type Description
Editor 1. Press 'Channel' softkey.
2. Change value.
3. Press 'ENT' to confirm the new selection.
This softkey allows the user to manually select
the channel. In mode ‘scan 2’ or ‘scan 5’, this
is done automatically by ALE, searching for
the best channel.