M3SR Series 4100 Changing the Modem Deacquire Limit
4.134 Operating Manual 6175.4760.02 – 01
4.5.4.1 Changing the Modem Deacquire Limit
Softkey Type Description
Listbox 1. Press 'Deacquire' softkey.
2. Select desired modem deacquire limit
from listbox.
3. Press 'ENT' to confirm. The new modem
deacquire limit is now effective.
Possible values:
•slow
• medium
•fast
This setting determines the time that the re-
ceiving HF modem will continue to attempt to
decode data after a loss of the signal, caused
by termination of the transmission or due to
significant fading.
Deacquire limit approximate duration [s]
•Fast 1
• Medium 5
•Slow 20
To Next Page
Loading...