This document describes the following R&S
®
RTM models with firmware 05.8xx and higher:
●
R&S
®
RTM2022: 200 MHz, 2 channels (5710.0999K22)
●
R&S
®
RTM2024: 200 MHz, 4 channels (5710.0999K24)
●
R&S
®
RTM2032: 350 MHz, 2 channels (5710.0999K32)
●
R&S
®
RTM2034: 350 MHz, 4 channels (5710.0999K34)
●
R&S
®
RTM2052: 500 MHz, 2 channels (5710.0999K52)
●
R&S
®
RTM2054: 500 MHz, 4 channels (5710.0999K54)
●
R&S
®
RTM2102: 1 GHz, 2channels (5710.0999K02)
●
R&S
®
RTM2104: 1 GHz, 4 channels (5710.0999K04)
The software contained in this product makes use of several valuable open source software packages. For information, see the
"Open Source Acknowledgement" on the user documentation CD-ROM (included in delivery).
Rohde & Schwarz would like to thank the open source community for their valuable contribution to embedded computing.
© 2015 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 164
Email: info@rohde-schwarz.com
Internet: www.rohde-schwarz.com
Subject to change – Data without tolerance limits is not binding.
R&S
®
is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
The following abbreviations are used throughout this manual: R&S
®
RTM2000 is abbreviated as R&S RTM.
To Next Page
Loading...
