Instrument tour
R&S
®
ZNA
25Getting Started 1178.6456.02 ─ 18
4.1.1 Touchscreen
The touchscreen is split into two parts: the application window with diagrams and soft-
tools on the left, and the control window with its (virtual) function keys and data entry
controls on the right. User interaction is touch-only, i.e. all hardkeys commonly used in
Rohde & Schwarz VNAs have been implemented in software.
Refer to the data sheet for the technical specifications of the touchscreen.
Function
Keys
Data Entry
Panel
Application Window Control Window
Screen saver
The screen saver function of the operating system can be used to switch off the display
if the analyzer receives no command for a selectable period of time. The display is
switched on again when the touchscreen is touched.
4.1.1.1 Application window
The left part of the touchscreen is reserved for the application window.
The application window presents the measurement results, mostly in form of diagrams.
The toolbar, softtools and menu bar give access to all instrument functions. For an
introduction to touchscreen operation, refer to Chapter 5.1, "Manual operation",
on page 33.
The following sections contain further useful information about manual control of the
instrument.
●
Refer to Chapter 5, "Operating the instrument", on page 33 to learn how to handle
traces and diagrams, and how to use menus, keys and softtools.
●
Refer to chapter "Concepts and Features" in the user manual or help system to
obtain information about the results in the diagram.
Front panel
To Next Page
Loading...
