Need help?Do you have a question about the R&S ZVA Series and is the answer not in the manual?
General| Frequency Range | 10 MHz to 67 GHz (depending on model) |
|---|---|
| Number of Ports | 2 or 4 (depending on model) |
| Display | 12.1" LCD |
| Weight | Approx. 25 kg (depending on model) |
| IF Bandwidth | 1 Hz to 10 MHz |
Overview of front panel controls, display, keys, and connectors for initial setup.
Description of rear panel connectors and their functions for connectivity.
Basic steps for setting up the analyzer for the first time, including unpacking and placement.
Procedure for powering the analyzer on and off, including standby states.
Details on the analyzer's Windows OS, system configuration, and modifications.
Guidance on connecting peripherals like mouse, keyboard, printer, and monitor.
Steps for physical LAN connection and TCP/IP configuration for network integration.
How to enable and set up remote access to the analyzer via LAN.
Instructions for updating the analyzer's firmware using setup files.
Detailed guide on setting up and performing reflection measurements on a DUT.
Steps for performing transmission measurements, noting differences from reflection measurements.
Common operations like controlling the analyzer via front panel keys and data entry.
Fundamental concepts of organizing, processing, and displaying measurement data.
Description of navigation tools, menu bar, softkeys, and hardkey bar for UI control.
Overview of measurement results like S-parameters, impedances, and wave quantities.
Explanation of system error correction, calibration types, and standards.
Introduction to software options that enhance analyzer functionality and measurement capabilities.
Definitions of terms used throughout the analyzer's documentation and operation.
Alphabetical listing of topics and their corresponding page numbers for quick reference.
To Next Page
