Operating the instrument
R&S
®
ZNA
52Getting Started 1178.6456.02 ─ 18
See Chapter 4.1.1.3, "Control window: data entry panel", on page 27.
In single-window mode (System – [Display] > "Config" > "Single Window Mode") only
the application window is shown, with its virtual Hardkey panel enabled. The values
can be edited in place, either using an external keyboard or by calling the VNA's
numeric editor or on-screen keyboard (see Chapter 5.6.2, "Using the numeric editor",
on page 52, or Chapter 5.6.3, "Using the analyzer's on-screen keyboard",
on page 53).
5.6.2 Using the numeric editor
The "Numeric Editor" is a tool for convenient entry and modification of numeric values.
It is available for all numeric input fields in the analyzer GUI.
The numeric editor is particularly useful in single-window mode. In dual-window mode,
a suitable editor is automatically displayed: whenever an editable value is selected in
the main window or a dialog, the data entry part of the control window is adjusted
accordingly. Hence in dual-window mode there is typically no need to open the numeric
editor.
Operation with touchscreen or mouse:
1. Double-tap (double-click) a numeric input field in a dialog or on a softtool to open
the numeric editor.
Entering data
To Next Page
Loading...
