R&S ZNA26 - Page 1182

Command reference
R&S
®
ZNA
1182User Manual 1178.6462.02 ─ 20
Example:
MMEM:COPY 'C:\Users\Public\Documents\
Rohde-Schwarz\ZNA\RecallSets\SET1.znxml','D:'
Copy file Set1.znxml in directory
C:\Users\Public\Documents\Rohde-Schwarz\ZNA\
RecallSets to the external storage medium, mapped to drive
D:.
Usage: Setting only
MMEMory:DATA <Filename>[, <DataBlock>]
Loads a <DataBlock> into the file <FileName>.
Parameters:
<Filename> String parameter to specify the name of the file.
<DataBlock> <block_data>
Data in IEEE488.2 block data format. The delimiter EOI must be
selected to achieve correct data transfer.
Example:
MMEM:DATA? 'C:\Users\Public\TEST01.HCP'
Query the block data contained in file TEST01.HCP.
MMEMory:DELete <File>[, <Force>]
Removes a file from the specified directory.
Setting parameters:
<File> Mandatory string parameter containing the path and file name of
the removed file. If the path is omitted, the current directory is
used (see MMEMory:CDIRectory).
<Force> FORCe
Optional parameter, allows you to delete read-only files, too.
Example:
MMEM:DEL 'C:\Users\Public\TEST01.HCP'
Remove file TEST01.HCP from the directory C:
\Users\Public. The file must not be read-only; otherwise the
additional parameter FORCe is required.
Usage: Setting only
MMEMory:DELete:CORRection <CalGroupName>
Deletes a system error correction data set stored in the cal pool (cal group file).
SCPI command reference