R&S ZNA26 - External Tools Application

GUI reference
R&S
®
ZNA
729User Manual 1178.6462.02 ─ 20
The "External Tools" application is always available, other applications are provided by
certain software options.
5.17.1 External Tools application
The "External Tools" application gives access to pre-installed and user-defined external
tools.
Access: System – [Applic] > "External Tools"
GPIB Explorer
Opens a tool that allows you to connect to the analyzer, obtain an overview of all imple-
mented remote control programs, test programs, compile and run test scripts. For a
detailed description, refer to Chapter 6.1.3, "GPIB Explorer", on page 847.
Protocol Wordpad
Convenience function for opening the WordPad word processor.
This may be used for creating ad hoc measurement protocols, reports etc.
Applic softtool