GUI reference
R&S
®
ZNA
657User Manual 1178.6462.02 ─ 20
Note: The loaded file is stored in the active recall set. Persisted recall sets contain the
full (de-)embedding data so that they can be transferred to other instruments.
Remote command:
MMEMory:LOAD:VNETworks<Ch>:PPAir:DEEMbedding<ListId>
MMEMory:LOAD:VNETworks<Ch>:PPAir:EMBedding<ListId>
5.14.1.5 Balanced panel
This panel allows you to activate or deactivate deembedding/embedding of balanced
ports.
Access: Overview panel > "Balanced"
If the selected Balanced tab is defined using one or more touchstone files, these files
can be selected from the dock widget ("...").
For network types that are defined using one or more touchstone files, the required
files can also be selected from here ("...").
If necessary, use the button on the right-hand side to open the Balanced Ports dialog
and change the balanced port configuration.
This panel can also be activated by selecting the Balanced tab. Refer to its description
for background information, parameters and additional remote commands.
Offset Embed softtool
To Next Page
Loading...
