GUI reference
R&S
®
ZNA
712User Manual 1178.6462.02 ─ 20
The selected item in the " Print Charts" group specifies how the diagram area of the
active recall set is printed. Currently the following options are offered: "No Diagram at
all", "Active Diagram only", "All diagrams on one page", "All diagrams on their own
page" and "Hard copy of diagram area". The latter is a screenshot of the diagram area,
which preserves colors and layout.
Note that the " Print Charts" setting also affects the To File... and To Clipboard actions
of the Print tab.
If selected in the "Print other information" group, the content of the "Info Table" (see
"Info Table: Show / Position" on page 777) and/or "Setup Info" (see "Setup Tab"
on page 805) is printed on additional pages.
5.15.4.2 Printer tab
The "Printer" settings select one of the installed printers and specify printer options.
Printers can be installed using the Windows
®
"Devices and Printers" functionality; see
also Chapter 3.1.11.4, "Connecting a printer", on page 37.
Print Options
Selects the color scheme to be used for printing. In the current implementation:
●
The "User Defined" color scheme can only be configured in the Define User Color
Scheme dialog
●
Modified settings are only applied, if the "User Defined" color scheme is reassigned
Remote command:
HCOPy:PAGE:COLor
5.15.4.3 Page Setup tab
The "Page Setup" settings are visualized in the preview page in the lower part of the
dialog.
File Print softtool
To Next Page
Loading...
