Command reference
R&S
®
ZNA
960User Manual 1178.6462.02 ─ 20
CALCulate:FMODel:DIRectory:DEFault:CLEar
Deletes all files in the common default working directory of the of the ISD, SFD, and
EZD tool (C:\Users\Public\Documents\Rohde-Schwarz\ZNA\Embedding).
Usage: Event
Manual operation: See "Output Settings" on page 674
CALCulate:FMODel:REName <Boolean>
If set to ON (1), the names of subsequently generated "Test Coupon" and "DUT + Test
Fixture" files are prefixed with the current date and time.
Parameters:
<Boolean>
Manual operation: See "Output Settings" on page 674
7.3.1.9 CALCulate:FORMat...
The CALCulate:FORMat... commands determine the post-processing of the mea-
sured data in order to obtain various display formats.
CALCulate<Chn>:FORMat <Type>
Defines how the measured result at any sweep point is post-processed and presented
in the graphical display.
Note: The analyzer allows arbitrary combinations of display formats and measured
quantities; see Chapter 5.3, "Format softtool", on page 374 and
CALCulate<Ch>:PARameter... commands. Nevertheless, it is advisable to check
which display formats are generally appropriate for an analysis of a particular mea-
sured quantity; see Chapter 4.2.3.3, "Measured quantities and trace formats",
on page 121.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Type> MLINear | MLOGarithmic | PHASe | UPHase | POLar | SMITh |
ISMith | GDELay | REAL | IMAGinary | SWR | COMPlex |
MAGNitude | LOGarithmic
See list of parameters below.
*RST: MLOGarithmic
Example:
CALC4:PAR:SDEF 'Ch4Tr1', 'S11'
Create channel 4 and a trace named Ch4Tr1 to measure the
input reflection coefficient S
11
. The trace becomes the active
trace in channel 4.
CALC4:FORM MLIN; :DISP:WIND:TRAC2:FEED 'CH4TR1'
Calculate the magnitude of S
11
and display it in a linearly scaled
Cartesian diagram, assigning the trace number 2.
SCPI command reference
To Next Page
Loading...
