Administrative tasks
R&S
®
ZNA
73Getting Started 1178.6456.02 ─ 18
2. Use the Windows icon in the toolbar (or the Windows key on an external keyboard)
to access Windows
®
.
3. Open the "Control Panel" > "Network and Sharing Center" > "Change adapter set-
tings" dialog and right-click the local connection.
4. Select "Properties" and confirm the user account control message, depending on
your current user account.
● If your current account is an administrator account, select "Yes".
● If your account is an account with standard user rights, enter the password of
the administrator account and select "Yes".
Figure 7-1: User Account Control dialog
5. In the "Connection Properties" dialog opened, select "Internet Protocol Version 4
(TCP/IPv4) > Properties" and enter the IP address information.
Remote operation in a LAN
To Next Page
Loading...
