Preparing for Use
R&S
®
ZNLE
23Getting Started 1323.2873.02 ─ 07
b) Specify a directory that contains the driver software.
To disconnect a USB device
► Remove the device from the USB interface of the R&S ZNLE.
Windows immediately detects the change in hardware configuration and deac-
tivates the corresponding driver.
4.3.1 Connecting a Keyboard
The keyboard is detected automatically when it is connected. The default input
language is English – US.
However, you can also connect foreign language keyboards; currently the follow-
ing languages are supported for the R&S ZNLE:
●
German
●
Swiss
●
French
●
Russian
To configure the keyboard language
1. To access the Windows operating system, press the Windows key on the
external keyboard.
2. Select "Start > Settings > Time & language > Region & language > Add a lan-
guage" .
4.3.2 Connecting a Printer
When printing a file, the instrument checks whether a printer is connected and
turned on and whether the appropriate printer driver is installed. If necessary,
printer driver installation is initiated. You only have to install a printer driver once.
You can load updated and improved driver versions or new drivers from an instal-
lation disk, USB memory stick or another external storage medium. If the instru-
ment is integrated in a network, you can also install driver data stored in a net-
work directory.
Connecting USB Devices
To Next Page
Loading...
