R&S ZNLE Series - Zooming into the Display

Trying Out the Instrument
R&S
®
ZNLE
56Getting Started 1323.2873.02 ─ 07
6.2 Zooming into the Display
To analyze the areas around the peak levels in more detail, we will zoom into a
peak.
1. Tap the "Multiple Zoom" icon in the toolbar.
The icon is highlighted to indicate that zoom mode is active.
2. Tap the diagram near the peak and drag your finger to the opposite corner of
the zoom area. A white rectangle is displayed from the point where you tap-
ped to the current position.
Figure 6-1: Defining the zoom area
When you remove your finger, the zoom area is enlarged in a second
(sub-)window.
Zooming into the Display