Instrument Tour
R&S
®
ZNLE
37Getting Started 1323.2873.02 ─ 07
1 = Toolbar with standard application functions, e.g. print, save/open file etc.
2 = Tabs for individual channel setups
3 = Softtool panel (a.k.a. softkey bar)
4 = Window title bar with diagram-specific (trace) information
5 = Measurement results (diagram) area
6 = Channel list
7 = Diagram footer with diagram-specific information
8 = Instrument status bar for error messages and date/time display
A touchscreen is a screen that is touch-sensitive, that is: the firmware reacts in a
specified way when you move your fingers on the screen. Using touchscreen ges-
tures, you can perform the following tasks (among others).
(See Chapter 6, "Trying Out the Instrument", on page 46)
●
Changing a setting
●
Changing the display
●
Changing the displayed result range in a diagram
●
Moving a marker
●
Zooming into a diagram
●
Selecting a new evaluation method
●
Scrolling through a result list or table
●
Saving or printing results and settings
To imitate a right-click by mouse using the touchscreen, for example to open a
context-sensitive menu for a specific item, press the screen for about 1 second.
For details on touchscreen gestures see Chapter 7.4, "Touchscreen Gestures",
on page 68.
5.1.2 Power Key
The [Power] key is located on the lower left corner of the front panel. It starts up
and shuts down the instrument.
See also Chapter 4.1.5, "Switching the Instrument On and Off", on page 16.
Front Panel View
To Next Page
Loading...
