Operating the Instrument
R&S
®
ZNLE
65Getting Started 1323.2873.02 ─ 07
The softtools are displayed in the softkey bar of the instrument. The title area of
the softkey bar displays the name of the currently opened softtool.
If you close the softkey bar using its close icon, it is automatically reopened
the next time a function key is pressed. You can change this behavior in the
"User Interface" tab of the "VNA Setup" dialog.
Some controls on the softtool tabs allow you to read and modify settings (e.g.
"Ref Value" in the screenshot above), some perform actions (e.g. "Auto Scale
Trace"), while others open additional dialogs (button label ends with "...").
7.2.3 Context Menus
Several items in the diagram area have context menus (for example markers,
traces or the channel bar). If you right-click on one of these items (or tap it for
about 1 second), a menu is displayed which contains the same functions as the
corresponding softkey. This is useful, for example, when the softkey display is
hidden.
Accessing the Functionality
To Next Page
Loading...
