Rane MP25 - Warranty Procedure - Valid in USA Only

· ·
(Signature)
January 18, 2011
(Date)
Mukilteo WA, USA
(Place)
Compliance Engineer
(Position)
Declaration of Conformity
Application of
Council Directive(s):
2002/96/EC
2004/108/EC
2011/65/EU
Manufacturer:
Rane Corporation
10802 47th Avenue West
Mukilteo WA 98275-5000 USA
is equipment has been tested and found to be in compliance with all applicable standards and regulations applying to the
Electromagnetic Compatibility (EMC) directive 2004/108/EC. In order for the customer to maintain compliance with this
regulation, high quality shielded cable must be used for interconnection to other equipment. Modication of the equipment,
other than that expressly outlined by the manufacturer, is not allowed under this directive. e user of this equipment shall
accept full responsibility for compliance with the EMC directive in the event that the equipment is modied without writ-
ten consent of the manufacturer. is declaration of conformity is issued under the sole responsibility of Rane Corporation.
Type of Equipment: Professional Audio Signal Processing
Brand: Rane
Model: MP25
Immunity Results: THD+N: 4 dBu, 400 Hz, BW = 20 Hz - 20 kHz
Test Description Specification Conditions
RF Electromagnetic Fields Immunity
80 MHz -1000 MHz, 1 kHz AM, 80% depth, 3V/m < -73 dB
Conducted RF Disturbances Immunity
150 kHz - 80 MHz, 1 kHz AM, 80% depth, 3V RMS < -65 dB 150 kHz - 1.19 MHz
< -46 dB 1.19 MHz - 3.84 MHz
< -65 dB 3.84 MHz - 16.6 MHz
< -51 dB 16.6 MHz - 80 MHz
Magnetic Fields Immunity
50 Hz - 10 kHz, 3.0 - 0.3 A/m < -74 dB
Common Mode Immunity (Signal Ports)
50 Hz - 10 kHz, -20 dBu < -72 dB
I, the undersigned, hereby declare that the equipment specied above conforms
to the Directive(s) and Standard(s) shown above.
Greg Frederick
(Full Name)
Standard(s) to which
conformity is declared:
EN60065: 2002/A1:2006/A11:2008
EN55103-1:2009
EN55103-2:2009
EN50581:2012
ENVIRONMENT E2
SERIAL NUMBERS 850000 - 950000