RECORD BURN - This section of the control
vinyl has been worn. Swap sides or adjust
the Vinyl Start Offset.
LEFT CHANNEL MISSING - The signal from
the needle is not reaching the Sixty-Two.
Check the cable and cartridge wiring.
RIGHT CHANNEL MISSING - The signal from
the needle is not reaching the Sixty-Two.
Check the cable and cartridge wiring.
BAD RECORD BURN - Your record is worn and
Scratch Live is unable to track correctly.
Swap sides or get new vinyl ASAP.
LEFT CHANNEL IS NOISE - Left signal has
been lost with a noisy loose connection.
RIGHT CHANNEL IS NOISE - Right signal has
been lost with a noisy loose connection.
TONEARM IS SLIGHTLY TOO LIGHT -
Susceptible to dust and vibration. Adjust
the tonearm.
SIGNALS ARE SUMMING TO MONO - The left
and right signals have been combined into
one somewhere in your signal chain.
RIGHT CHANNEL IS INTERFERENCE - Right
signal has been lost with a noisy loose
connection and left channel crosstalk.
RANE SIXTY-TWO MIXER FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.4.4
49
To Next Page
Loading...
