Range Master 47262 - Step 3: Attaching Legs and Leg Bowls; Step 4: Attaching Wire Shelf and Wheels

11
Assembly instrucons
STEP 3
Insert Bolts (1) through the Large Metal
Washers (9), Boom Bowl (B), Leg Bowls
(L) and thread into the Staonary Legs
(G). Repeat this process to aach the
Wheel Legs (H) to the Boom Bowl (B).
STEP 4
Align the leg holes with the ends of the
Wire Shelf (K). Slide the longer threaded
ends of the Wire Shelf through the holes
in the Wheel Legs (H). Slide the Plasc
Washers (11) and Wheels (J) over the
ends of the Wire Shelf. Thread Wheel
Lock Nuts (7) onto the Wire Shelf ends
and parally ghten. Slide the shorter
Wire Shelf ends through the holes in the
Staonary Legs (G) and Plasc Washers
(11). Then thread Wheel Lock Nuts (7)
onto the Wire Shelf ends. Check align-
ment of legs, nong that the holes on the
Staonary Legs for the Condiment Rack
should face inward, and securely ghten
the Wheel Lock Nuts (7) with an adjust-
able wrench.