8
Temperature Setting and Control
Adjusting the Freezer Temperature
Press the ‘Frz. Temp’ button (Fig.2.17). The freezer
temperature display will start blinking, which means the
freezer section is in the temperature setting mode.
Press the ‘Frz. Temp’ button to scroll, in turn, through the
freezer temperature range from –14 °C through to –22 °C.
Without any further operation in 5 seconds, the blinking will
stop and the temperature will be set. The temperature will
also stay still at the time you press any other button during
the blinking.
Adjusting the Fresh Food Temperature
Press the ‘Ref. Temp’ button (Fig.2.18). The fridge temperature
display will start blinking, which means the fridge is in the
temperature setting mode.
Press the ‘Ref. Temp’ button to scroll, in turn, through the
fridge temperature range from 09 °C through to 01 °C.
Without any further operation in 5 seconds, the blinking will
stop and the temperature will be set. The temperature will
also stay still at the time you press any other button during
the blinking.
Operating the Water Dispenser
When using the water dispenser for the rst time you may not
get water out immediately since air will be in the line. Please
press the dispenser tab for at least 1 minute, to clear the air
and replace it with water from the water tank.
The rst few cups of water will be warmer than the remaining
cups. This is normal.
• Do not use a paper cup or one that is too tall to fit into
the dispenser cavity.
• When dispensing water please keep your cup under the
spout for a few seconds after finishing operating the tab
to catch all the water droplets.
• If the dispenser has not been used for a while, throw
away the first 5 cups of water to remove any impurities
in the lines.
Door Ajar Alarm
If any door is left open for more than 60 seconds the Door
Ajar Alarm function will start. An alarm will buzz at 30-second
intervals to alert the user that a door has been left open.
Power-breaking Memorising Function
When the refrigerator turns o as a result of a power surge,
the state of the refrigerator before the power break is
memorised. Once restarted, this allows the refrigerator to
operate with the programmed default values as before the
power break.
S.Frz.
TEMPERATURE CONTROL
Frz.
Temp
OK
Ref.
Temp
3S
S.Frz.
TEMPERATURE CONTROL
Frz.
Temp
OK
Ref.
Temp
3S
Fig.2.17
Fig.2.18
To Next Page
Loading...
