EasyManua.ls Logo

Rangemaster Professional+ 90 Induction - Error Code Er; Fuse Blows or RCD Trips; Hob Will Not Switch On; Induction Hob Noise

Rangemaster Professional+ 90 Induction
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTALLATION
Check the appliance is electrically safe when you have nished.
27
You will need the following equipment to complete the
cooker installation satisfactorily:
Multimeter (for electrical checks).
You will also need the following tools:
1. Steel tape measure
2. Cross-head screwdriver
3. Flat-bladed screwdriver
4. Spirit level
5. Pencil
6. Adjustable spanner
7. 3 mm and 4 mm Allen keys
8. 13 mm spanner or socket wrench
Checking the parts:
Dear Installer
Before you start your installation, please complete the details
below, so that, if your customer has a problem relating to
your installation, they will be able to contact you easily.
Safety Requirements and Regulations
This cooker must be installed in accordance with
the relevant instructions in this booklet, with the
relevant national and local regulations, and with the
local electricity supply companies’ requirements.
The appliance must be installed in accordance with
the regulations in force and only in a well ventilated
space.
Read the instructions before installing or using this
appliance.
Provision of Ventilation
This appliance is not connected to a combustion products
evacuation device. Therefore, particular attention must be
given to the relevant requirements regarding ventilation.
All rooms require a window that can be opened, or
equivalent, while some rooms require a permanent vent in
addition to the window.
Location of Cooker
The cooker may be installed in a kitchen/kitchen diner but
NOT in a room containing a bath or shower.
This appliance is designed for domestic cooking only. Use for
any other purpose could invalidate any warranty or liability
claim.
ArtNo.050-0011 - Installer information table
Installers Name
Appliance Serial Number
Installers Telephone Number
Installers Company
Grill pan and trivet
(standard model shown)
Flat oven shelf
ArtNo.330-0002 - Grill pan w handle
Handyrack Roasting tin
ArtNo.324-0003 Handyrack
ArtNo.324-0004 Roasting tin
Plinth (standard model shown)
Tall oven shelves and shelf
supports
(example shown)
ArtNo.000-0010 Tall oven shelves
Splashback (optional)
ArtNo.421-0002 - Splashback
8. Installation

Related product manuals