Ranger R76LT - Specifications

R76 Series of Tire Changers 10 P/N 5900346 — Rev. C — Dec. 2019
Specifications
Model R76ATR R76LT
Motor 3 HP, 208-240 VAC, 50/60 HZ, 1 Ph. Use 30 amp plug.
Power Cord Length 96 in (8 feet) / 2,438 mm
Drive System Type Electric / Air
Air Requirement 140 – 165 PSI (9.6 – 11.4 BAR)
Wheel Clamping 4 Clamps – Internal / External
Table Clamping Dual Pneumatic Cylinders
Bead Breaking Pneumatic Power / Adjustable Blade
Tower Design Tilt Back
Assist Tower Single Assist Tower, Four
Additional Tools
No Assist Tower
Bead Sealing Turbo Blast
Internal Rim Clamping 10 – 30 in (254 – 762 mm)
External Rim Clamping 9 – 28 in (229 – 711 mm)
Turntable Tire Width
Capacity (Mounting)
4 – 18 in (102 – 457 mm)
Bead Breaker Tire Width
Capacity (Demounting)
1.5 – 13 in (38 – 330 mm)
Maximum Tire Diameter 43 in (1,092 mm)
Sound <70 dB
Dimensions
75 in wide* by 66 in deep** by
79 in high
1,905 mm wide* by 1,677 mm
deep** by 2,007 mm high
41 in wide by 66 in deep** by
79 in high
1,042 mm wide by 1,677 mm
deep** by 2,007 mm high
* With Assist Arms at full extended width.
** With Main Tower tilted back and Slide all the way back.
Specifications subject to change without notice.