R76 Series of Tire Changers 3 P/N 5900346 — Rev. C — Dec. 2019
Table of Contents
Introduction 3 Operation 23
Shipping Information 4 Maintenance 53
Safety Considerations 4 Troubleshooting 56
Components 6 Wiring Information 57
FAQs 9 Labels 58
Specifications 10 Parts 61
Installation Checklist 11 Maintenance Log 87
Installation 12
Introduction
This manual describes the following models in the R76 Series of Tilt-Back Tire Changers:
• R76LT. Tilt-Back Tire Changer, no Assist Tower.
• R76ATR. Tilt-Back Tire Changer with Assist Tower.
More information about BendPak Ranger products is available at rangerproducts.com.
This manual is mandatory reading for all users
of the R76 Series of Tire Changers, including
anyone who sets up, operates, maintains, or repairs them.
You can always find the latest version of the manual for your product on the Ranger website.
⚠ DANGER Be very careful when setting up, operating, maintaining, or repairing this equipment;
failure to do so could result in property damage, product damage, injury, or (in very
rare cases) death. Make sure only authorized personnel operate this equipment. All
repairs must be performed by an authorized technician. Do not make modifications
to the unit; this voids the warranty and increases the chances of injury or property
damage. Make sure to read and follow the instructions on the labels on the unit.
Keep this manual on or near the equipment so that anyone who uses or services it can read it.
Technical support and service for your Tire Changer is available from your distributor or by calling
BendPak Ranger at (805) 933-9970. You may also call regarding parts replacement (please
have the serial number and model number of your unit available).
To Next Page
Loading...
