R76 Series of Tire Changers 20 P/N 5900346 — Rev. C — Dec. 2019
Prepare the Lube Bucket
The Tire Changer comes with a Lube Bucket (to hold your Tire Lubricant) and a Lube Brush (to apply
your Tire Lubricant).
BendPak Ranger does not include any Tire Lubricant with the Tire Changer, as there are many options
available.
⚠ CAUTION Only use Tire Lubricant that is approved by the Tire manufacturer for the Tire you
are changing. Using non-approved Tire Lubricant could corrode the Wheel or cause
Tire/Wheel slippage and vibration issues.
Be sure to use enough Tire Lubricant without using too much. The point of Tire Lubricant is to
temporarily
reduce the friction between the Tire Bead area and the Rim. What you are looking for is
a Tire Lubricant that is slippery when wet but not slippery once dried. If you notice excessive amounts
of Tire Lubricant on the Tire or Rim, remove the excess.
There is a location on the Tire Changer specifically for the Lube Bucket.
Top view. Not necessarily to scale. Not all components shown.
To Next Page
Loading...
