Seat position adjustment
The distance between the seat and the tiller can be
adjusted for optimum comfort/legroom. To do this:
1. Sit on the scooter and pull the seat position /
slider adjustment lever upwards (Fig.13). This will
allow the seat to slide back and forth.
2. Using your body mass, slide the seat into a
comfortable position.
3. Release the lever. The seat will now be locked
in your preferred position.
Tiller Folding
The tiller can be folded down for transportation and
storage. Take care when lowering the tiller not to
pinch your fingers.
1. Push the tiller release lever downwards as
shown - this will allow the tiller to be put in the
desired position (Fig.14).
2. Lower the tiller so that it is in its lowest position
(Fig.15).
3. Release the tiller lever and the tiller will be set
in that position.
Tip: The tiller can be adjusted in the same way to
achieve a comfortable driving position.
13
13
15
Warning! Before driving, always check
that the tiller is securely in the upright driving
position. Safe steering may be impossible if
you do not !
14
To Next Page
Loading...
