Page 3 of 18
Safety Information
Read, understand, and follow all safety information contained in these instructions prior to
use of the RASLOK Water Purifier HCM-T1.
Retain these instructions for future reference.
Intended Use:
The RASLOK
TM
Water Purifier HCM-T1 is intended for use in filtering tap water for drinking purposes. The system
is typically installed at point of use and must be installed by a RASLOK authorized professional installer
according to installation instructions.
Explanation of Signal Word Consequences:
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury and/or property damage.
Indicates a situation which, if not avoided, could result in property
damage.
WARNINGS
About the Power Supply
To reduce the risks associated with hazardous voltage and fire:
●
Do not plug-in multiple devices into the same power outlet or extension cord simultaneously.
●
Plug the power cord into a 220 V outlet with at least a rating of 10 A and power surge protection.
●
Please ensure the power plug and power outlet is clean and dry.
●
Damaged parts or machine malfunction are only to be repaired or replaced by RASLOK
authorized professionals.
To reduce the risks associated with hazardous voltage:
●
Do not operate the machine with wet hands.
●
Do not bend the power cord excessively or put heavy objects over the power cord. Ensure your pets do
not damage the power cord.
●
Do not use the equipment if there is any damage to power cord, plug or the outlet.
To Next Page
Loading...