To Next PageTo Next PageWhat to do if my RASLOK Water Filtration System shows E5:00 error?
If your RASLOK Water Filtration System displays error code E5:00, it indicates a water shortage error. To resolve this, check the tap water supply to ensure it's adequately providing water to the system.
Why is my RASLOK Water Filtration System leaking?
If your RASLOK Water Filtration System is leaking water, first inspect the connector to ensure the pipe is connected properly. If the water or PE pipe is bursting, it will need to be replaced.
How to fix a RASLOK Water Filtration System that fails to run?
If your RASLOK Water Filtration System is not running, ensure that the power supply is switched on.
Why is my RASLOK Water Filtration System making so much noise?
If your RASLOK Water Filtration System is making excessive noise, ensure that the machine is placed on a steady and solid surface for stable operation.
How to prevent electric leakage in RASLOK HCM-T1 Water Filtration Systems?
If the RASLOK Water Filtration System experiences electric leakage, use a three-pin socket with earth wire, ensuring the machine is properly grounded.
Why does my RASLOK Water Filtration System have small water flow?
A small water flow in your RASLOK Water Filtration System could be due to low water pressure. Check the tap water to ensure adequate pressure. Alternatively, the filter lifespan may be up, requiring a filter replacement.
What does E6:00 mean on my RASLOK Water Filtration System?
If your RASLOK Water Filtration System displays error E6:00, which indicates a dry heating alarm, power the system off and then on again. If the problem continues, further assistance is needed.
General| Brand | RASLOK |
|---|---|
| Model | HCM-T1 |
| Category | Water Filtration Systems |
| Language | English |
Defines the purpose of the water purifier for filtering tap water for drinking.
Details risks associated with hazardous voltage, fire, and proper power connection.
Provides important guidance for safe installation and operation, including placement and connections.
Lists crucial notices regarding installation, operation, and maintenance for safety and performance.
Identifies and lists the main external components of the water purifier with corresponding numbers.
Explains the operation and indicators for hot and cold water dispensing buttons.
Describes the clock/timer display and the volume selection button functionality.
Details buttons for smart sensor, extra hot water, and mixed water dispensing.
Explains the button for system settings, filter lifespan, and UVC LED control.
Step-by-step operations for dispensing hot, cold, and lukewarm water.
Instructions for operating the extra hot water function and selecting volumes.
Procedure for setting the time and adjusting hot/cold water temperatures.
Guide for turning the UVC LED sterilizer on/off and understanding its operation.
Details on checking filter lifespan, replacement indicators, and resetting the life counter.
Instructions for configuring and understanding the energy-saving mode.
Step-by-step guide for taking out and replacing the water filters.
Details the item number, description, function, and lifespan of the filters.
Illustrates the flow of water through various components like filters and valves.
Presents the electrical circuit layout, including control board and components.
Instructions for cutting, connecting, and disconnecting tubing using quick fittings.
Guidance on placing the drip tray and connecting the water inlet pipe.
Lists common issues like water flow, leakage, and noisy operation with their causes and solutions.
Explains error codes (E1:00-E6:00) and solutions for machine malfunctions.
Details voltage, power consumption, cooling/heating power, and refrigerant gas.
Specifies water output rates, temperature ranges, and filter lifespans.
Lists applicable water pressure, product dimensions, weight, and climate class.
Outlines the warranty period and conditions, excluding failures from misuse.
Defines the extent of RASLOK Pte Ltd's liability for product-related losses.
