Raspberry Pi 4 b User Manual

7/1/2019 Setting up your Raspberry Pi | Raspberry Pi Projects
https://projects.raspberrypi.org/en/projects/raspberry-pi-setting-up/print 11/34
Raspberry Pi 4, 3, and Pi Zero W can also be wirelessly connected to the internet.
Step 3
Set up your SD card
If you have an SD card that doesn’t have the Raspbian operating system on it yet, or if you want to reset
your Raspberry Pi, you can easily install Raspbian yourself. To do so, you need a computer that has an SD
card port — most laptop and desktop computers have one.
The Raspbian operating system via NOOBS
Using the NOOBS software is the easiest way to install Raspbian on your SD card.
Note: more advanced users looking to install a particular operating system should use this guide to
installing operating system images (https://www.raspberrypi.org/documentation/installation/insta
lling-images/README.md).
Download NOOBS
Visit the Raspberry Pi downloads page (https://www.raspberrypi.org/downloads).

Raspberry Pi 4 b Specifications

General

Processor	Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
RAM	2GB, 4GB, or 8GB LPDDR4-3200 SDRAM (depending on model)
Ethernet	Gigabit Ethernet
Video Output	2 × micro-HDMI ports (up to 4Kp60 supported)
Storage	MicroSD card slot for operating system and data storage
GPIO	40-pin GPIO header
Power Supply	5V DC via USB-C connector (minimum 3A*)
Wireless	2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
USB Ports	2 × USB 3.0 ports, 2 × USB 2.0 ports
Audio Output	3.5mm audio jack
Operating Temperature	0 – 50 °C
GPU	VideoCore VI graphics
Power Options	USB-C or GPIO header