31
If the chosen Algorithm is VPM:
R0:
sets the Critical Bubble Radius’ value.
It is possible to set R0 from 0.4 to 1.0
Do you know what?: You can keep pressed the buttons C or D to change the iX3M data more rapidly.
ATTENTION: To change the Critical Bubble Radius’ value a suitable theoretical
knowledge is needed.
DO NOT CHANGE THE CRITICAL BUBBLE RADIUS WITHOUT
HAVING RECEIVED A SUITABLE TRAINING.
The RATIO iX3M is not responsible for damages to people or objects due to a wrong
setting of such parametres.
For suggested protection levels refer to the previous pages of this manual.
Do you know what?:
If you have any doubts on your device’s setting, you can set the company’s parametres from the menu DEFAULT
Do you know what?:
Generally speaking, the increasing of the R0 involves your computer’s conservatism increase.
Do you know what?:
With the RATIO iX3M it is possible to change the value R0 while diving, to manage possible emergencies.
DIVE SETTINgS
WATER:
DIVE MODE:
GFL/GFH
ALGORITHM:
DECO CTRL:
b
A C D
ExIT
NExT
ENTRY
+
_
SALT
SCUBA
0.50
VPM
ON
For iX3M Tech+ iX3M Reb
To Next Page
Loading...
