ratiotec RS 2200 - Technical Specifications and Troubleshooting; Display and Language Settings; Technical Specifications; Error Codes

9
CONTRAST: Use CONTRAST adjust the contrast of the RS  screen to make it more visible in your environ-
ment. The default setting is .
To change CONTRAST, press OK when CONTRAST is shown in the Setup Menu. Press < or > to choose a value
between  (darkest) and  (brightest). Press OK to conrm your choice.
LANGUAGE: Use the LANGUAGE function to change the display language of the RS .
To change LANGUAGE, press OK when LANGUAGE is shown in the Setup Menu. Press < or > to choose ENG
LISH, ESPANOL or FRANCAIS. Press OK to conrm your choice.
Technical Specications
Error Codes
Net weight: . lbs (. kg)
Dimensions: .” L x .” w x .” h (xxmm)
Power Consumption: - V~/ Hz . A max
Power supply:  V -  mA adapter;  AAA batteries (optional)
Currencies: USD, CAD, MXN
Error Code Cause Solution
REMOVE SOME BILLS OR TH CUP A weight of more than  kg was
placed on the scale.
Remove the complete weight from
the money scale and restart the
weighing procedure using a smaller
amount.
Too many paper bills were placed
at one time on the scale during the
paper currency counting procedure.
Remove some of the bank notes
and continue the weighing process.
Never place more than  bankno-
tes on the scale at once. On the
RS , over time you will be able
to place up to  banknotes at one
time, due to its dynamic weighing
abilities.
The coin cup is on the scale and
you want to count paper currency.
Remove the coin cup from the
scale and start the paper currency
weighing procedure.
OVERLOAD TOO MUCH WEIGHT More than  kg was placed on the
scale.
Remove all weight from the scale.
ERROR COUNT AGAIN A button was pushed during the
weighing procedure.
The weighing procedure was
cancelled. Remove all weight from
the cup support hod and restart
the weighing procedure.
[ EN]