To Next PageTo Next Page
Need help?Do you have a question about the Ravaglioli RAV505 IF and is the answer not in the manual?
General| Capacity | 5000 kg |
|---|---|
| Lifting height | 2235 mm |
| Motor power | 3.5 kW |
| Type | Electro-hydraulic |
| Platform Length | 5000 mm |
| Weight | 1800 kg |
| Lifting time | 45 seconds |
| Power Supply | 400V / 50Hz / 3Ph |
Identifies safety devices on the lift, referring to Fig. 0-1 for visual representation.
Highlights residual risks shown in the manual and on the machine via adhesive pictograms.
Details compliance with European directives and testing coefficients for dynamic and static loads.
Details minimum site requirements for installation, covering environmental and safety aspects.
Strictly forbids improper uses like lifting people, animals, or vehicles with people inside.
Permits use of original accessories only, specifying the four supplied rubber pads for car lifting.
Emphasizes that only trained and authorized personnel can operate the lift for safety and efficiency.
Describes emergency descent procedures, including lifting pawls, using spacers, and manual valve operation.
Refers to section 4.12 for checking safety devices and warns against tampering with equipment.
Details the procedure for changing hydraulic oil in the central unit, including frequency and oil type.
Lists required information for ordering spare parts: machine model, year of manufacture, serial number, and table reference.
States that Fig. 26 and the following summary help identify machine groups and tables for ordering parts.
Checklist for initial installation of the lift, covering site, connections, controls, and safety devices.
Checklist for periodic inspections: platform height, base anchoring, oil level, safety devices, and controls.
Section for recording occasional checks, with fields for date and installer signature.
