To Next PageTo Next Page
Need help?Do you have a question about the Ravaglioli RAVTD5060WD Series and is the answer not in the manual?
General| Brand | Ravaglioli |
|---|---|
| Model | RAVTD5060WD Series |
| Category | Measuring Instruments |
| Language | English |
Describes the step-by-step process for installing the RAV program on a PC.
Details the procedure for updating the RAV Wheel Aligners AS9 series software.
Explains how to customize printouts by adding a dealer's logo to the program.
Instructions for connecting the wheel aligner console to the power supply.
Guides on connecting wireless and wired measuring heads to the aligner console.
Details the process of pairing Bluetooth measuring heads with the aligner cabinet.
Explains how to connect wired measuring heads to the PC via serial ports.
Connects RMS device and electronic turntables to the aligner system.
Overview of internal connections within measuring heads and their boards.
Details the procedure for calibrating measuring heads using specific calibration systems.
Adjusts caster angles for vehicle longitudinal level differences.
Adjusts steering wheel position for accurate readings after vehicle alignment.
Verifies communication between heads and console via firmware versions.
Displays all angle readings categorized into five groups for verification.
Tests the angular transducer (encoder) function on turntables for WS models.
Tests the angular transducer (encoder) function on measuring heads.
Verifies measuring heads' keyboards by checking key press feedback.
Displays counters for diagnosed, regulated, and saved vehicle tests.
