To Next PageTo Next Page
Need help?Do you have a question about the Ravaglioli RAVTD5040WD Series and is the answer not in the manual?
General| Brand | Ravaglioli |
|---|---|
| Model | RAVTD5040WD Series |
| Category | Measuring Instruments |
| Language | English |
Step-by-step guide for installing the RAV wheel aligner software on a PC.
Instructions for updating the software of the RAV Wheel Aligners AS9 series.
Procedure to customize the printout with a dealer's logo.
Guidance on connecting the wheel aligner console to the main power supply.
Instructions for establishing communication between measuring heads and the console.
Procedure for pairing Bluetooth measuring heads with the aligner cabinet.
Instructions for connecting wired measuring heads to the PC via serial ports.
Details the connection procedure for the R.M.S. (Remote Measuring System) device.
Guide for connecting the STDA43K electronic turntables to the measuring heads.
Description of internal connections within measuring heads and sensor devices.
Guide on how to calibrate the measuring heads, including systems and procedures.
Procedure to adjust caster angle readings compensating for vehicle level differences.
Procedure to self-calibrate the steering wheel position for accurate readings.
Tests communication between measuring heads and console by checking firmware versions.
Displays all angle readings from measuring heads, categorized into five groups.
Verifies the correct functioning of turntable encoders by checking angle readings.
Verifies the correct functioning of measuring head encoders by checking angle readings.
Tests the functionality of the measuring head keyboards by checking key presses.
Displays counters for diagnosed, regulated, and saved vehicle alignment tests.
