Chapter 2
10 600S™ Installation and Operation Manual
5. Verify Port A Baud Rate is 115200.
FIGURE 6. Port A Configuration
Note: A Baud Rate of 115200 for Port A indicates that the receiver is configured correctly.
Note: Port B may be used to output NMEA information to the auxiliary components at a user selectable
Baud Rate.
GS Satellite
To support GS, the receiver must be a GS or RTK
unlocked model (063-2000-002, 063-2000-003) or
enter an unlock authorization code.
To receive satellite GS correction, purchase a
satellite correction plan at http://
ravenslingshot.com/store.
Select the desired accuracy to begin field
operations. Note that smaller accuracy
levels will result in longer convergence
wait times at receiver startup before the
GPS status indicators reach a green state.
• Receiver convergence times depend on
satellite availability (clear view of the sky)
and atmospheric disturbance levels.
• Satellite GS absolute horizontal position
accuracy is less than 3” (7 cm) when fully
converged on a moving vehicle. Satellite
GS can reach absolute horizontal
position accuracy of 1.5” (3.8 cm) when
stationary and fully converged.
Note: Leave the accuracy level at
maximum for quicker first time
convergence.
RTK
To support RTK, the receiver must be an RTK
unlocked model (063-2000-003) or enter an unlock
authorization code.
Leave the default settings shows in the
image below when using a Slingshot Field
Hub for RTK corrections.
Correction
Type
Details Additional Information
To Next Page
Loading...