How to troubleshoot Raven 500S receiver when it fails to power on?
If the Raven Antenna receiver fails to power on, you should: * Verify the polarity of the power leads. * Ensure the CR7™ is powered on. * Check the integrity of the power cable connections. * Confirm the power input voltage is within the range of 7 - 32 VDC. * Verify that the power source meets the current restrictions (maximum 500 mA at 12 VDC).
What to do if my Raven 500S has no GNSS lock?
If your Raven Antenna isn't getting a GNSS lock, try the following: * Check the integrity of the antenna’s power/data cable. * Make sure the antenna has a clear view of the sky. * Verify the lock status and signal-to-noise ratio (SNR) of the GNSS satellites.
What to do if Raven Antenna shows no valid data from the 500S™?
If you are not getting valid data from the 500S™ on your Raven Antenna, try the following: * Verify that the antenna is tracking four or more GNSS satellites. * Check the integrity and connectivity of the power and data cable connections. * Ensure that the baud rate settings match.
What to do if Raven Antenna shows no communication data from the 500S™?
If there's no communication data from the 500S™ on your Raven Antenna, please check: * The receiver power status. * That the baud rate settings match. * The settings on the CR7™ console; if needed, redetect serial devices.
Why does my Raven Antenna have no GNSS position?
If your Raven Antenna is not showing a GNSS position, ensure the antenna has a clear view of the sky, particularly toward GNSS satellites. Also, set the satellite selection to automatic mode.
What to do if 500S™ LED on Raven Antenna is not blinking after connection to power?
If the 500S™ LED on your Raven Antenna is not blinking after connecting to power: * Check if the power supply is functioning correctly. * Ensure the cable is completely seated and secured to the 500S™ connector.
Why am I getting random binary data from 500S™ Raven Antenna?
If you're getting random binary data from the 500S™ on your Raven Antenna: * Verify that the RCTM or BIN messages are not being accidentally output. * Ensure the baud rate settings match. * Consider that the volume of data requested might exceed the current baud rate's capacity; try using a higher baud rate or decreasing the number of messages.
What to do if 500S™ LED displays solid color content (not blinking) on Raven Antenna?
If the 500S™ LED on your Raven Antenna displays a solid color and is not blinking, power-cycle the receiver.
Lists the primary capabilities and advantages of the 500S™ antenna, including voltage range and satellite tracking.
Identifies unit ports and connection locations on the bottom of the 500S™ antenna for installation.
Explains proper antenna placement and mounting options for optimal performance and positioning accuracy.
Provides guidelines for safely routing and securing cables during the installation process to prevent damage.
Details the available pole mounting configurations and components for the 500S™ antenna.
Specifies input voltage range, power requirements, and performance considerations for the 500S™.
Details how to connect the 500S™ to a power source, including warnings about voltage and polarity.
Explains the preconfigured operation modes, initial startup sequence, and GNSS receiver functions of the 500S™.
Details the scope of warranty for defects in workmanship or materials under normal use.
Specifies the duration of the limited warranty from the date of sale or product issue.
Outlines the process for obtaining warranty service through a dealer and Raven Industries.
Explains Raven Industries' commitment to repair or replace defective products under warranty.
Lists exclusions from warranty coverage, including external repairs and damages from misuse or neglect.
Details the scope of the extended warranty for product defects in workmanship or materials.
Explains product registration requirements and deadlines for extended warranty eligibility.
Provides instructions on how to register products online to qualify for the extended warranty.
Specifies the duration of the extended warranty coverage from the date of retail sale.
Outlines the process for obtaining service for products covered by the extended warranty.
Explains Raven Industries' actions for confirmed extended warranty claims, including repair or replacement.
Lists exclusions and limitations for the extended warranty coverage, including cables and software.
To Next Page
General