Chapter 3
12 600S™ Installation and Operation Manual
TABLE 1. Status LEDs
Replacement Parts
The table below lists the replacement parts along with part numbers.
TABLE 2. Replacement Parts
LED Color State Description
Green Position Valid Indicates a valid position solution is available.
Yellow Error
Receiver is in the error state and tracking is
disabled. Possible causes include:
• A fatal error
• An unusual receiver status indicator, setup to act
like a fatal error. Note: Error status remains until
the cause of the error is corrected and the receiver
is reset.
Red Power The unit is receiving power.
Replacement Parts Part Number
Mounting Plate 063-2000-004
Standard Cable 115-0172-246
Phoenix Adapter Cable to 600S 115-0172-303
Miller Adapter Cable
and
600S to Case Harness Cable
115-0172-285
Case 30 Series Cable 115-0172-288
600S to Case Harness Cable 115-0172-288
600S Base Model 063-2000-001
600S GS Model 063-2000-002
600S RTK Model 063-2000-003
To Previous Page
Loading...