UPDATE MDU (ELECTRICAL STEER MOTOR UNIT) | CR7 WITH SGC STEERING | UPDATE CONTROLLERS
PAGE 10/17 | Update manual | 016-8000-xxx EN | Rev. A
3 UPDATE MDU (ELECTRICAL STEER MOTOR UNIT)
Connect and open the Raven Service Tool
(see step #01 to step #05).
Press on ‘Browse’ to select the file for the
MDU update.
Select the .hex file for updating the MDU;
MDU_P502_Standard_v2_1_0_92.hex
(or higher).
Once the file is selected, the Smartrax MD
should color lightblue (description is
different then in picture, description is
Smartrax MD).
Right-click on the device and select
Program to start the programming.
To Next Page
Loading...
Need help?
General
