Raw Thrills Super Bikes 3

Questions and Answers

T
telliottAug 18, 2025
Why won't my Raw Thrills Arcade Game Machine turn on?
- B
  Brian SchultzAug 18, 2025
  If your Raw Thrills Arcade Game Machine isn't powering on, several factors could be the cause. First, ensure the game is properly plugged into a functioning AC outlet. Next, check that the main power switch is turned on. Also, inspect the game's fuse and replace it if it's blown, referring to the Specification section for correct fuse values. Verify the AC outlet is providing power by testing it. Finally, ensure the Flash Drive Installer is disconnected from the PC and power cycle the game. In some cases, the PC BIOS settings may be incorrect and require adjustment as described in the BIOS Settings section.
M
Mason WardAug 20, 2025
How to fix no sound on Raw Thrills Super Bikes 3?
- E
  Erica ColemanAug 20, 2025
  If you're experiencing no sound or poor sound quality on your Raw Thrills Arcade Game Machine, start by checking the speaker connections. Ensure the volume isn't set too low by using the VOL UP button on the Test panel. Inspect the wiring to the speakers, PCB, and the green computer audio port for secure and correct connections, making sure no wires are frayed or shorting. Examine the speakers for visible damage. Weak or muffled sound may indicate reversed speaker wires. To verify audio is working at the computer, connect stereo headphones to the green computer audio port.
R
Randy SanchezAug 22, 2025
What to do if buttons or gas pedal don't work on Raw Thrills Arcade Game Machines?
- P
  Pamela GarciaAug 23, 2025
  If the buttons or gas pedal on your Raw Thrills Arcade Game Machine aren't working, the issue could stem from a faulty micro switch. Try replacing the micro switch on the joystick/button and re-test, ensuring the wires are correctly connected. Another potential cause is faulty wiring. Disconnect the cabinet from AC power and check that all wires are firmly connected to each joystick/button and the PCB, ensuring no wires are frayed or shorting. Also, verify the wires are connected to the correct spades on the micro switches. If these steps don't resolve the problem, the PCB might be faulty, so ensure all connections to it are secure, and replace it if necessary.
R
rvillarrealAug 26, 2025
Why is Raw Thrills Arcade Game Machine giving the wrong number of credits?
- H
  hoodscottAug 26, 2025
  If your Raw Thrills Arcade Game Machine is giving an incorrect number of credits when coins or bills are inserted, the first thing to check is the Pricing Adjustments settings. Ensure they are correctly configured. Also, disconnect the cabinet from AC power and verify that all wires are firmly connected to the coin mech and bill validator, and that the ground wires are properly connected. Check for any frayed wires or shorts. Lastly, make sure the coin mech isn't jammed and is properly aligned and latched to the coin door.
A
amcbrideAug 28, 2025
How to fix Raw Thrills Super Bikes 3 when the game doesn't load?
- T
  Tasha PhillipsAug 28, 2025
  If your Raw Thrills Arcade Game Machine isn't loading, it could be due to a PC hard drive failure. To address this, attempt to recover the hard drive. Refer to the Flash Installer Document or contact your distributor for the latest software revision for guidance.
K
kmartinAug 30, 2025
How to troubleshoot no video on Raw Thrills Super Bikes 3?
- M
  maureenhenryAug 30, 2025
  If you're experiencing a 'No Video' issue with your Raw Thrills Arcade Game Machine, first ensure that the PC is turned on. Check that the PC power switch is on and the IEC cable is tightly plugged in, tracing the cable back to the source to ensure continuity. Additionally, verify that the video cable (DVI or HDMI) is securely connected to both the monitor and the PC.
L
Lori LucasSep 2, 2025
What does it mean when my Raw Thrills Super Bikes 3 says dongle not present?
- L
  Linda BirdSep 2, 2025
  If your Raw Thrills Arcade Game Machine displays a 'Dongle Not Present' message, it indicates that the dongle is either missing or disconnected. First, locate the dongle cable and reseat it in the USB port. If the issue persists, try inserting the dongle cable into a different USB port, as the original port may be faulty.
G
Glenn SmithSep 4, 2025
What to do if Raw Thrills Arcade Game Machines keeps resetting?
- L
  Laura SantosSep 4, 2025
  If your Raw Thrills Arcade Game Machine keeps resetting, it may be due to a bad file. Try running the Flash Installer to resolve this issue.
P
Penny CruzSep 6, 2025
What to do if neither buttons nor audio work on Raw Thrills Super Bikes 3 Arcade Game Machines?
- C
  Christian LewisSep 7, 2025
  If neither the buttons nor the audio are functioning on your Raw Thrills Arcade Game Machine, it could be due to the PCB being connected to a faulty USB port. The boot message might indicate that the device is not detected. To test the USB port, turn off the game, disconnect the device from the port, and connect the game dongle to the port. Reboot the game. If a 'No Dongle' message appears, the port is likely bad. If the game starts, the port is working. After testing, reconnect all devices to the correct USB ports and reboot.
R
Ronald BakerSep 9, 2025
Why doesn't the coin meter click during the test on my Raw Thrills Super Bikes 3 Arcade Game Machines?
- M
  Mike MataSep 9, 2025
  If the coin meter isn't clicking during the test on your Raw Thrills Arcade Game Machine, it could be due to several reasons. First, check the wiring from the meter to the PCB board to ensure there's a pulse to the meter. If the wiring is correct, the meter itself might be faulty and require replacement. Also, check and replace the 12VDC fuse(s) in the cabinet, as blown fuses can prevent the meter from functioning.

Raw Thrills Super Bikes 3 Specifications

General

Game Type	Racing
Number of Players	2
Developer	Raw Thrills
Multiplayer	Yes
Network Support	Yes
Motion System	No
Display	LCD
Controls	Handlebar
Sound	Stereo speakers
Genre	Racing
Cabinet	Standard