Data
3d chart
Requires upgraded cartography (chart card).
Displaying applications
The various applications that make up your A-Series system are
arranged in groups called page sets.
Selecting a page set
To select a page set:
1. Press and hold the PAGE/MENU key to display the setup menu
2. Choose the Select Page Set option.
Selecting an application page
Once you have selected the appropriate page set, as detailed above,
choose the application page that you want to use.
To view an application page:
1. Press PAGE/MENU to show the available pages in the toolbar.
2. Either select the application page you want from the toolbar or
toggle between the applications configured in the page set by
pressing PAGE/MENU.
3. Press OK or CANCEL.
•
View data generated by the system or by
instruments available on NMEA 0183,
NMEA 2000 or SeaTalk
ng
.
D9520-1
•
Display a 3D view of land, sea & features.
•
Locate where you are.
•
Interpret your surroundings.
•
Monitor where you are going.
•
Go to an existing waypoint.
•
Navigate a route.
•
Synchronize with the 2D chart.
•
Identify fishing spots.
Highlight appropriate
pre-configured page set
To Next Page
Loading...
